HELCO - Pultrusion Profiles

The desired properties that pultrusion profiles combine and make them replace a lot of conventional materials such as metal, wood, aluminium etc. are the following (indicational values are given, along the profil) :

1. High Mechanical Strength

• Tensile strength

700 - 800 MPa

• Modulus of elasticity in tension

35 - 40 GPa

• Flexural strength

700 - 800 MPa

• Modulus of elasticity in flexion

35 - 45 GPa

• Elongation before break

2 %

• Compression strength

350 - 450 MPa

• Modulus of elasticity in compression

25 - 30 GPa

• Impact strength (Izod)†

2000 J/m

• Hardness Barcol

45 - 50


2. Low specific weight

• Density

1.8-2.0 kg/dm3


Pultrusion productsí relatively low specific weight combined with their good mechanical strength result in specific strength values greater than those of steel.

3. Resistance to chemical and thermal infection and to corrosion

• Temperature range of usage

-100 oC to +150 oC

• Humidity absorption

0.15 %


4. Electric and heat insulation

• Thermal conductivity

0.2 - 0.4 W/mK

• Coefficient of thermal expansion

12(E-6) (1/K)

• Electrical resistivity

1(E-10) - 1(E-15) Ohm/cm

5. No need of service and protection

6. Adaption of materialís characteristics to the specialized demands of every application

7. Good machinability and easy application



HELCO manufactures :

I-beams 80 (x 3) x 30 (x 5) mm
150 (x 8.5) x 75 (x 8) mm
U-beams : 80 (x 3) x 30 (x 5) mm
Rods : ÷ 9 mm
÷ 14 mm
Tubes : ÷ int. 32 / ÷ ext. 36 mm
Square Tubes : 156 x 156 x 13 mm
Flat Rods : 100 x 4 mm
100 x 6 mm
100 x 8 mm
100 x 10 mm

Custom shapes (according to customerís requirements)